BIKE SPEEDOMETER HUB DRIVE FOR OLD SCHOOL HURET TYPE SPEEDO’S WORKS ON ANY SIZE WHEEL

• THIS IS A VERY VERY HARD TO FIND REPLACEMENT HUB DRIVE FOR OLD TYPE BIKE SPEEDOMETERS.
• WE MENTION HURET IN THE HEADING BUT THIS IS NOT A HURET PRODUCT & WE ARE NOT SURE IF IT WILL FIT HURET CABLE AS THIS HAS A 2.5mm DRIVE SO PLEASE CHECK BEFORE ORDERING
• BOLTS ON TO THE FRONT HUB SPINDLE (INSIDE OF THE FORK) AND AS IT WORKS ON THE ROTATION OF THE HUB YOU CAN USE THIS ON ANY SIZE WHEEL WITH SPOKED HUB
• THIS IS VERY UNUSUAL BECAUSE IT HAS DOUBLE THREAD SO YOU CAN USE IT ON THE RIGHT OR LEFT SIDE
• THREAD IS FOR 11mm CABLE
• FITS TO ANY STANDARD 2.5mm ROTATING SPEEDO CABLE (WE HAVE THESE AVAILABLE IN SEPERATE LISTINGS)
• VERY RARE SO BUY WHILE WE HAVE THESE IN STOCK
• WE CANNOT GUARANTEE THIS WILL FIT ANYPARTICULARBIKE AS SOME BIKES HAVE SPECIAL FORKS OR DIFFERENT SPACED SPOKES , SO PLEASE MAKE YOUR OWN MIND UP

TECHNICAL INFORMATION
THE UNIT IS 3/8″ 10mm SPINDLE SIZE.
THE BLACK SECTION DIAMETER IS 24mm ie THE SECTION THAT FITS OVER YOUR CONE & LOCKNUT SO WONT INTERFERE WITH ANYTHING.
THE DEPTH OF THE INNER METAL SECTION IS APPROX 4-5mm WHICH FITS ON THE WHEEL SPINDLE, NOT SUITABLE FOR FULLY ROUNDED FORKS WITH NO FLATTED LOWER SECTION AS USED ON SOME CHOPPER/GRIFTER BIKES